12V 24V 30A PWM Solar Charge Controller Manual, New Condition

Description

🏷️ About the Product

• View and Download PowerTech MP3755 user manual online. 12V/24V 30A PWM Solar Charge Controller for Lithium or SLA Batteries. MP3755 controller pdf manual download.
• Introduction Thank you for purchasing the Nature SeaChoice Power 30A Digital Solar Charge Controller. With our state of the art, easy to use design, this product will offer you a reliable service to convert your solar energy to charge your low voltage battery system in an effective and efficient way.
• PWM Solar Charge Controller User Manual This controller is suitable for lithium batteries and all kinds of lead-acid batteries (OPEN, AGM, GEL) .

🔑 Key Features

✅ Applicable for 3 types of batteries

B01 Lead acid batttery

B02 Lithium ion battery

B03 Lithium iron phosphate battery

✅ Power-cut memory function. The power-cut memory function can automatically memory retention of users’ last settings.

✅ Large-screen LCD display. Charging and discharging parameters can be fully customized.

✅ Adopt complete three phase PWM charge management (Constant current mode, Constant voltage mode, Floating charge mode)

🛠️ Usage Instruction

• Step 1: It also protects your battery from being overcharged by the solar panel, or over-discharged through the DC loads connected to terminals 5-6 (if any).
• Step 2: The unit uses PWM (Pulse Width Modulation) current control techniques to regulate the charging current (and so the voltage) being supplied to the battery by the panel (or panels).
• Step 3: This device is a PWM 12/24V 30A charge controller used in solar applications.
• Step 4: Its flush mount design is ideal for solar power systems in RV’s, boats and vehicles.
• Step 5: Carefully read the manual before installation.
• Step 6: This controller is suitable for lithium batteries and all kinds of lead-acid batteries (OPEN, AGM, GEL) .

📱 Product Specification

Voltage	12V/24V ⚡
Current	30A 🔌
Control Type	PWM ⚙️
Battery Types	Lithium, SLA, OPEN, AGM, GEL 🔋
Display	Large-screen LCD 📊
Memory Function	Power-cut retention ✅
Charge Management	3 Phase PWM 📈

📄 Product Details

• View and Download PowerTech MP3755 user manual online.
• 12V/24V 30A PWM Solar Charge Controller for Lithium or SLA Batteries.
• MP3755 controller pdf manual download.
• Introduction Thank you for purchasing the Nature SeaChoice Power 30A Digital Solar Charge Controller.
• With our state of the art, easy to use design, this product will offer you a reliable service to convert your solar energy to charge your low voltage battery system in an effective and efficient way.
• PWM Solar Charge Controller User Manual
• This controller is suitable for lithium batteries and all kinds of lead-acid batteries (OPEN, AGM, GEL) .

Full Images

Product Standout Benefits

This PWM solar charge controller is designed to automatically manage the working of solar panels and batteries in solar systems. It features an industrial microcontroller for intelligent control.

Key Features and Advantages

• UPGRADED SOLAR CONTROLLER: With the built-in industrial microcontroller, this PWM solar charge controller automatically helps you manage the working of solar panels and batteries in solar systems.
• EASY TO USE AND SAFE: When the battery runs out, it will memorize various parameters you set, so you don’t need to reset it, which is easy and safe.
• WIDELY COMPATIBILITY IN BATTERY: The 30A solar charge controller is compatible with 12V or 24V systems automatically. It is suitable for lead-acid batteries, such as OPEN, AGM, and GEL.
• DUAL USB OUTPUT: Dual USB 5V/3A output ports support mobiles, tablet PCs, or other devices that require 5V voltage.
• EASY TO READ AND ADJUSTABLE: Easily to read the status and data with an LCD display. It is also able to switch modes and parameter configuration, such as adjustment of battery float, reconnect, and stop discharge voltage, which can perfectly protect the battery from over-discharge.
• SAFE TO USE: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the solar controller, but a reliable protector for your devices and prolong the lifespan.

Customer Questions and Answers

How do I install and operate this solar charge controller?

The charge controller should connect the battery first, then the solar panel, and finally the load. The disassembly sequence is contrary to the wiring order. Please refer to the manual for details.

What types of batteries is this solar charge controller compatible with?

This 30A solar charge controller is compatible with 12V or 24V systems automatically and is suitable for lead-acid batteries, such as OPEN, AGM, and GEL. It is NOT suitable for Lithium Battery.

Can I charge my phone or tablet with this controller?

Yes! It features dual USB 5V/3A output ports that support mobiles, tablet PCs, or other devices that require 5V voltage.

What kind of protection does this controller offer?

It is safe to use with built-in overcurrent protection, short circuit protection, reverse connection protection, and open circuit protection. All protections feature automatic recovery, ensuring no damage to the controller and providing a reliable protector for your devices.

What is the warranty or after-sale support?

We offer a 12-month guarantee for quality-related issues and technical support. If you experience any issues, please contact us for immediate support or a refund.

Is this controller suitable for home use?

Yes, it is suitable for home, industrial, and commercial applications.

Buyer’s Guide

Ready to set up your solar system? Here’s how to make it happen!

Getting started with your new solar charge controller is super straightforward. Just follow these simple steps:

Step 1: 🔌 Connect the Battery First
Before anything else, make sure to connect the battery to the charge controller. This is the first crucial step to ensure everything powers up correctly.

Step 2: ☀️ Connect the Solar Panel
Once the battery is connected, you can then connect your solar panel to the charge controller. This allows the controller to start receiving power from the sun.

Step 3: 💡 Connect the Load
Finally, connect your electrical load (the devices you want to power) to the charge controller. Now your system is ready to go!

Step 4: 🔄 Disassembly Order
Remember, when you need to disconnect everything, do it in the reverse order: disconnect the load first, then the solar panel, and lastly the battery. Easy peasy!

Step 5: 📖 Refer to the Manual
For more detailed information on specific settings or troubleshooting, always refer to the user manual. It’s got all the nitty-gritty details you might need.

Step 6: 🛠️ Consider Related Products
To get the most out of your solar system, consider pairing your charge controller with compatible solar panels and deep-cycle lead-acid batteries. Ensure your setup is designed for 12V or 24V systems as specified.