30 Amp 12V 24V PWM Solar Charge Controller Regulator with Dual USB Ports

Description

About the Product 🔑

WIDELY COMPATIBILITY IN BATTERY	✅ Compatible with 12V or 24V systems automatically, suitable for lead-acid batteries (OPEN, AGM, GEL).
ECO-WORTHY UPGRADED 30A PWM	⭐ Automatically detects 12V/24V DC system voltage, max discharge current 30A.
SYSTEM POWER SUPPORT	⚡ Supports 12V 750W; 24V 1500W.
DUAL USB OUTPUTS	🔌 Built-in 5V/2A for charging devices on-the-go.
TIMEUSB COMPATIBILITY	🔋 Works with LiFePO4 and Lead-acid (Gel/Flooded/AGM) batteries.
SUPERIOR HEAT DISSIPATION	💡 Constructed from die-cast aluminum for excellent heat dissipation, reducing power loss and enhancing durability.

Usage Instruction 🛠️

This solar charge controller helps you manage the working of solar panels and batteries in solar systems automatically with the build-in industrial microcontroller.

When the battery runs out, it will memorize various parameters you set, so you don’t need to reset it, which is easy and safe.

Compatible with 12V and 24V systems (automatic adaptation, depends on your systems’s voltage, no manual adjustments required). A little amplitude voltage deviation is normal.

You can also charge your mobile phone, tablet, and PC through the Dual USB output 5V/2.5A (max).

This solar controller is ONLY suitable for various Lead-acid batteries (including open, sealed, colloid, etc.) Please DO NOT charge to lithium or nickel-metal hydride batteries, etc.

Auto-recognizing battery voltage function can protect the battery from misuse and better control the charging process.

Note: When installing the controller for the first time, please ensure the battery is fully charged to recognize the battery type correctly.

With Intelligent protection against overcurrent, short-circuit, open-circuit, inverse, low voltage, and overcharge, all of which are automatic recovery types, do not damage the controller.

It also has a dual MOS anti-backflow circuit and low heat.

This 30A solar charge controller will help you improve the system efficiency and prolong the battery life.

But still note to install the controller on a flat, well-ventilated surface.

Let you know the working status and data with the LCD.

The regulator equips load time control and a manual setting function, so you can switch modes and configure parameters conveniently.

A good choice for use at home, industrial, commercial, etc.

See the instruction manual for specific parameter settings and adjustment methods.

Main interface 1. Press the flip key alone to turn on / off the load.

Interface 5 load working mode: [24h] load normally open mode.

HOW TO CONNECT THE SYSTEM- When installing, please install the battery first and then connect the solar panel. When disassembling, first remove the solar panel and then the battery. Please connect the devices as the instruction manual shows or the system may be damaged by misuse.

1. Connect the positive and negative electrodes of the livestock battery into the controller according to the diagram, and the controller will automatically detect the voltage of the livestock battery. 🔋
2. Connect the positive and negative poles of the load into the controller according to the diagram, and be careful not to connect them in reverse. 🔌
3. Connect the solar panel to the controller as shown in the figure. ☀️

Note: please connect in strict accordance with the above order, otherwise the controller may be damaged.

The disassembly sequence is opposite to the wiring sequence.

Setting parameters

In the interface 2-5, long press the up key for 5 seconds to restore the default value.

Press and hold the menu key for 5 seconds to enter the manual setting. At this time, the number will flash.

Press the up and down keys to adjust the parameter value, and then press the menu key for 5 seconds to exit the setting. ⚙️

Watch Video on how to use: https://www.youtube.com/watch?v=S9-xOMrHTGg 🎬

Product Specification 📱

System Voltage	✅ 12V/24V Automatic Detection
Max Discharge Current	⚡ 30A
Max System Power	750W (12V) / 1500W (24V)
USB Output	🔌 Dual USB 5V/2A (or 5V/2.5A max)
Battery Types Supported	⭐ Lead-acid (OPEN, AGM, GEL), LiFePO4 (Timeusb specific)
Material	💡 Die-cast Aluminum
Protection	🛡️ Overcurrent, Short-circuit, Open-circuit, Inverse, Low Voltage, Overcharge (automatic recovery)
Display	🖥️ LCD Display
Features	⚙️ Load time control, manual setting function, dual MOS anti-backflow circuit

Product Details 🏷️

This section is mandatory and must not be altered in any way.

No rewording, deleting, or adding content.

Ensure all bad HTML codes are properly cleaned. Remove any broken or incorrect HTML tags.

Do not change, rewrite, or add any new words. The original content must remain untouched.

If the content only contains a table, focus solely on cleaning the bad HTML tags without altering the content.

Never delete the table — this section is only for making the table better and more readable.

Visual symbols 🔹, icons ⭐, and emojis 😊 should be used in the table for better clarity and quick scanning.

Ensure that the table is well-structured, neat, and easy to read.

If content is mixed with the table, add some content to the table when necessary, ensuring it fits the context.

Content not in the table should be well-structured outside the table, using bullet points, well-spaced paragraphs, and clear subheadings.

Use visual icons 🔹, symbols ⭐, and emojis 😊 for easy scanning and better readability.

If needed, resize or rearrange the table to fit naturally within the content, but never alter its original data.

Make sure the table is visually appealing and well-aligned with the overall content layout. No “bogus-looking” tables!

Remove the “Customer Say” section if it exists.

🛍️ Order this amazing product today! 🚀

Full Images

### Product Standout Benefits

UPGRADED SOLAR CONTROLLER

With the built-in industrial microcontroller, this PWM solar charge controller automatically helps you manage the working of solar panels and batteries in solar systems.

When the battery runs out, it will memorize various parameters you set, so you don’t need to reset it, which is easy and safe.

WIDE COMPATIBILITY IN BATTERY

• The 30A solar charge controller is compatible with 12V or 24V systems automatically.
• Only suitable for lead-acid batteries, such as OPEN, AGM, and GEL.
• Dual USB 5V/3A output ports support mobiles, tablet PCs, or other devices that require 5V voltage.
• (NOTE: This PWM solar charge controller is NOT suitable for Lithium Battery.)

EASY TO READ AND ADJUSTABLE

Easily to read the status and data with an LCD display, which is also able to switch modes and parameter configuration.

Adjustment of battery float, reconnect, and stop discharge voltage, which can perfectly protect the battery from over-discharge.

Suitable for home, industrial, commercial, etc.

SAFE TO USE

• Built-in overcurrent protection.
• Short circuit protection.
• Reverse connection protection.
• Open circuit protection.
• All automatic recovery, no damage to the solar controller, but a reliable protector for your devices and prolong the lifespan.

EASY TO INSTALL AND OPERATE

The charge controller should connect the battery first, then the solar panel, and finally the load.

The disassembly sequence is contrary to the wiring order.

Customer Questions and Answers

Q: How do I install this product?

A: The charge controller should connect the battery first, then the solar panel, and finally the load. The disassembly sequence is contrary to the wiring order. Please refer to the manual for details.

Q: What types of batteries is this compatible with?

A: The 30A solar charge controller is compatible with 12V or 24V systems automatically, and only suitable for lead-acid batteries, such as OPEN, AGM, and GEL. This PWM solar charge controller is NOT suitable for Lithium Battery.

Q: Can I charge my phone with this?

A: Yes, dual USB 5V/3A output ports support mobiles, tablet PCs, or other devices that require 5V voltage.

Q: What kind of protection does this controller offer?

A: It has built-in overcurrent protection, short circuit protection, reverse connection protection, and open circuit protection, all with automatic recovery.

Q: What is the warranty for this product?

A: We offer a 12-month guarantee for quality-related issues and technical support. If you experience any issues, please contact us for immediate support or refund.

Q: What makes this controller stand out?

A: It features an UPGRADED SOLAR CONTROLLER with a built-in industrial microcontroller and memorizes parameters even if the battery runs out, making it easy and safe to use.

Buyer’s Guide

Step 1: 📦 Review the Product Details

Check out the product dimensions, weight, and manufacturer information to ensure it meets your needs.

Step 2: 📝 Read the FAQs

Go through the customer questions and answers for details on installation, battery compatibility, charging capabilities, protection features, and warranty.

Step 3: 💡 Understand Installation Order

Remember to connect the battery first, then the solar panel, and finally the load for installation. Disassembly is the reverse order.

Step 4: 🔋 Verify Battery Compatibility

Ensure you are using compatible lead-acid batteries (OPEN, AGM, GEL) for 12V or 24V systems. This controller is NOT suitable for Lithium Batteries.

Step 5: 🔌 Consider Related Products

While not explicitly mentioned, ensure you have appropriate solar panels and wiring to connect to the charge controller for optimal system performance.