SMS 100Ah Deep Cycle Solar Charge Controller for Reliable Renewable Energy Storage

₦230,000.00

Description

100 Amp MPPT solar charge controller ⚡	High tracking efficiency of up to 99% 📈
Peak conversion efficiency of 98.7% 🌟	About 30% higher than PWM ⬆️
Bluetooth app control 📱	Monitor all data in real-time 📊
Low-temperature cut-off protection for LiFePO4 batteries ❄️	Prevents damage to valuable batteries 🔋
Ten protection mechanisms 💪	Active cooling system 🌬️
SMS MPPT Solar Charge Controller 12V/24V/36V/48V/100A 🚀	Optimizes solar power systems ✨
MPPT (Maximum Power Point Tracking) technology 🔆	Maximizes energy harvesting 🌿
Implements best practices for solar battery systems 🛠️	Ensures prolonged battery health and efficiency 💯

CAUTION: If the temperature sensor is short-circuited or damaged, the controller will charge or discharge at the default temperature setting of 25 ºC.
When connect the controller to external devices, only one of the ports can be used; when use multiple controllers in parallel, the ports are for cascaded use.
The controller has two solar panel input ports, each with a maximum charging current of 30A. It can be connected arbitrarily, and the controller can work normally if only any one of the solar panels is connected.

Note: The above parameter setting takes 12V system as an example, if it is used for 24V/36V/48V system, each voltage parameter value *2/*3/*4.

System Voltage ⚡	12V/24V/36V/48V
Rated Charging Current 🔌	100A
Max Solar Panel Input Current 🔆	30A per port
Tracking Efficiency 📈	Up to 99%
Peak Conversion Efficiency 🌟	98.7%
Protection Mechanisms 💪	Ten mechanisms
Cooling System 🌬️	Active cooling
Battery Type Support 🔋	LiFePO4 (with low-temperature cut-off)
Connectivity 📱	Bluetooth app control